Slide 1

Slide 1 text

A RAMBLING TOUR OF MY BREWERY PROCESSES London Amateur Brewers 17 November 2025 Ian Cosier

Slide 2

Slide 2 text

■ A bit about my brewing ■ Recipe formulation ■ Brew day prep ■ Mash ■ Boil ■ Fermentation ■ Serving & Packaging

Slide 3

Slide 3 text

No content

Slide 4

Slide 4 text

No content

Slide 5

Slide 5 text

No content

Slide 6

Slide 6 text

Recipe Formulation ■ Software and brewday notes – iterative approach ■ Malts – single supplier ■ Hops – Fresher, later – Survivables – Substitutions: AA vs oil content – Spiders and altitude

Slide 7

Slide 7 text

Recipe Formulation – Brew Notes AG146 Oxford Road – English IPA OG1060-1062 (Pill 1068) FG1.014 (Pill 1018) 6.1% 4.4pH (vs ales 3.9 to 4.2pH) Brewed: 22/7/25. Kegged: 8/8/25 Brew notes: Thoughts for next brew - adjust malts to match Green run. Whirlpool only, with a very large quantity of low alpha hop. This seems to result in a stronger hop flavour and a rich smooth bitterness - as with Green Run and Lille Pils. Awful efficiency - crush too coarse? Dry hopping done @ 7deg for 2 days rather than 2-4 deg. Potential oxygen ingress during kegging? Tasting notes: 1wk: bitterness has an odd character. Fresh orange flavours not discernable. 7 weeks in, pithy unpleasant bitterness 1. Mash 62 deg for 60 mins, 70 deg for 30 mins. 2. 5.2pH vs 5.4/5.5pH. 3. 5 mins sparge time! Crush too large 4. Pre boil: (a)35L hot (b) @1043H vs 34L (BS estimates hot) @1049! Boil off for 30 mins to make 33.4L @ 1048. After 30mins, 2L boiled off @1046. Looks like boil off rate is closer to 4L/hr. Another 20 mins to get to 31.5L @1050. 5. Post boil hot volume is 25.5L, so 6L loss 6. Post boil: (a) 24.5L (cool) minus 1L hops minus 0.75 BZ minus 0.75 trub dump = 22L (b) @1.060H vs 26L @ 1.060H 7. Post boil pH: 5.14 before whirl. (Aim 5.0-5.2) 8. 22L into FV 9. Rehydrated yeast. Add GF enzyme. 0 mins of O2. Jetted into FV. Pitched 22g @6pm 1g/L. Started sometime before 6am Water Treatment 2:1 s:c. Post boil 120 calcium 150 S 75 C. Assumed 27 alk no adj. BF record ID: THJWM7H 20L Mash Acid: 6.34 Gypsum 6g (c66% total) Calcium Chloride 4g (c66% total) 15L sparge - hold back 2L Acid 0.48ml Boil additions Gypsum 3g (c34% total) Calcium Chloride 1.5g (c34% total)

Slide 8

Slide 8 text

Mélèze DIPA Recipe (26L)

Slide 9

Slide 9 text

Recipe Formulation ■ Mash profile ■ Yeast ■ Water Average recipe endpoint!

Slide 10

Slide 10 text

Brew Day Prep ■ Milling grains & sparge speed ■ Separate wheat and rye ■ Re-weigh after milling ■ Add mash salts ■ Treat HLT

Slide 11

Slide 11 text

Mash ■ Drill stirrer/Underletting ■ Mash hopping/Pomegranate extract ■ Measure pH

Slide 12

Slide 12 text

Mash ■ Monococtions ■ Overnight mashing ■ Retain sparge and aim high ■ Check gravity, revise hop schedule

Slide 13

Slide 13 text

Boil ■ Spider recirculation ■ Pump risks, unboiled wort ■ Flex use and layering hops ■ 10 minute additions

Slide 14

Slide 14 text

Boil ■ Whirlpool additions ■ Incognito ■ Chilling ■ Transfer options

Slide 15

Slide 15 text

Fermentation ■ Cold side sanitation ■ Oxygenation & antifoam ■ Profiles and hydrometers ■ Dry hops and Spectrum ■ Dry hops and rousing

Slide 16

Slide 16 text

Fermentation

Slide 17

Slide 17 text

Fermentation - lagers 50% 75% 90%

Slide 18

Slide 18 text

Kegging ■ Cold side sanitation ■ Keg purging ■ Transfers – Blockages – Purging lines – Keg fill level – Gelatine – Carbonation

Slide 19

Slide 19 text

Serving/Packaging ■ Beer adjustment – IBUs, pH, CO2, hops ■ Floating dip tubes ■ Keg level indicators ■ Manifolds and lines ■ Counterpressure filling

Slide 20

Slide 20 text

Cheers!