C2e76dc0f3f3ac47864ee907139a9a75?s=128

Peter Hill

peterhill

You may have heard a lot about activated carbon and wondered a lot about it. Anyone who hasn't tried using it would be hesitant to believe many of its claims. After all, how can a plain charcoal do a lot of wonders when it is nothing but black all over. But as you surf the web, you will know that it is used as an activated charcoal air freshener. It has been used as antidotes to poison too and even health experts guarantee its effectiveness. Hence, there is no reason why you wouldn't give it a try.

As you get more info about activated charcoal, you will know that organic chemicals are easily attracted by activated carbon. This means that activated carbon is not so good in removing inorganic chemicals. The material's polarity, molecular weight, temperature of the fluid stream and solubility of water are among the factors that determine the ability of the activated carbon to remove them. The materials that commonly adhere to activated charcoal are Toluene, Benzene, Xylene, chlorinated compounds and oils. The activated charcoal is also effective in the removal of color contamination and odors. The activated charcoal's content will depend on its manufacturer's choice. Some uses bituminous coal, coconut shell, coal and wood. If you want to know the ingredients contained in Sagano products, you can visit https://www.amazon.com/Best-Activated-Charcoal-Eliminator-Sagano/dp/B0181XKRUK . Sagano is famous for its deodorizing products like shoe insert and air deodorizer. You can check it out at Amazon.com.

It takes more than burning wood to make an activated carbon. And since there are many ways to do this, opt for a manufacturing process that yields higher quality and purer product. One is by placing the material inside a tank that is devoid of oxygen. This will then be heated to a very high temperature which is around 600-900 degrees Celsius. The carbon will then be exposed to various chemicals. The most commonly used chemicals are nitrogen and argon. Afterwards, this will be placed again in a tank heated at 600-900 Celsius. This time, it will be filled with oxygen and steam. The entire process will yield a very porous product with increased usable surface area.

Since there are so many options to choose from, you may be confused in the selection process. Activated carbon comes in different shapes and sizes and you may find it hard to determine which would work best for you. If you are going to use this to treat the air, large particles of activated carbon will be the best choice for you. This will lower the pressure drop through the bed. For liquid, the smaller particles are the best choice. This decreases the distance needed for the chemicals to travel before they will be adsorbed by the carbon. And don't worry about making choices since there are a lot you can choose from, basing on your personal needs. Substrates vary from coconut shell base to bamboo and many others. To know what product is best for you, you can consult with a general carbon representative to get the product that is suited best to fill in your needs.

Peter Hill hasn't published any talks.