FIX Reboot and Select Proper Boot Device Error Using Diskpart

After restarting if you're seeing a black screen which says reboot and select proper boot device then pay attention here because this solution can fix the boot device error. To learn about more way to fix the issue you can visit Coupweb: https://www.coupweb.com/reboot-and-select-proper-boot-device/

Transcript

1. FIX Reboot & Select Proper Boot Device Using DISKPART
2. Facing the error again!!!
3. The reason for the reboot and select proper boot device error could be that your primary partition is no longer set as active. CAUSE OF BOOT DEVICE ERROR
4. Steps To Resolve The Boot Device Issue Using Diskpart Insert boot media
5. STEP 1 Open Troubleshoot in system recovery options
6. STEP 2 In troubleshoot option, open advanced options & click command prompt
7. STEP 3 In the CMD, write DISKPART, hit Enter & follow: Type diskpart>>select disk 0>>type list partition>>select partition 1>>type active & hit enter>>restart
8. Still Facing The Reboot ERROR? Check out these 8 ways to fix the error reboot and select proper boot device windows on Coupweb.
9. FOLLOW US ON: