Upgrade to Pro — share decks privately, control downloads, hide ads and more …

cricut.com/setup

Avatar for mannyexplore mannyexplore
June 05, 2025
3

 cricut.com/setup

Cricut Joy, Maker, and Explore series are among the most prestigious and sought-after crafting machines available on the market. With their robust build quality and smart design, these machines allow users to work on 50+ to 300+ different types of materials. Even with these machines, you can cut special materials like metals, glass, leather, wood, etc. Before you use these machines, you must complete their setup on a device (Mac, iOS, Android, or Windows). On the cricut.com/setup website, you can learn more about the setup procedure.
install cricut design space app
cricut.com/setup
www.cricut.com setup login
cricut.com setup mac

Avatar for mannyexplore

mannyexplore

June 05, 2025
Tweet

Transcript

  1. Cricut machine blades need to be replaced because they wear

    down with use, especially when cutting thicker or tougher materials. If you’re cutting with it quite often, you may need to adjust it every six weeks. However, the exact time and frequency of blade changes depend on the machine’s usage. If you use a different variety of materials every day, your blade is likely to be damaged faster than that of the casual crafter. Note: Whether you have Explore, Maker, Joy Xtra, or Venture, the process of changing the blades is almost the same for all.
  2. How Often Should You Change Your Cricut Blade? I have

    listed down some of the tips that will help you remember when to change your blade.
  3. Changing Deep Cut, Bonded Fabric, & Fine-Point Blades in Cricut

    Please note that deep-cut, bonded fabric, and fine-point blades all utilize the same housing. If you want to save some dollars, simply buy the new blades and swap them while cutting for different materials, because buying the whole blade housing will cost you five times more than buying just the blade. Therefore, you should not touch your housing unless it has severe damage, as it is designed to last the lifetime of the machine. Now it’s time to learn how to change blade in Cricut easily. Step 1: Locate Clamp B on your Maker/ Explore machine and open it. If you’re using an older model, you need to unscrew the arms that hold the machine in place.
  4. Final Thoughts You’re all finished. Your blade is ready for

    precise cutting projects. The only tricky part when changing your blade is to ensure that the blade is fully down before closing the clamp. I hope this guide helped you while changing your blade in the Cricut machine with ease. Ensure to follow the instructions given above to change your blade safely. www.mannyexplore.com
  5. Frequently Asked Questions If you want to change the blade

    in Joy and Joy Xtra, follow these steps. How to change blade in Cricut Joy and Joy Xtra?
  6. How do I change the blade on a Cricut paper

    trimmer? Follow the steps given below to replace the blade on a paper trimmer: 1. Locate the handle on the paper trimmer. 2. Lift or slide the handle to access the blade housing. You may need to tilt or slide the blade out of the track. 3. Place the new blade into the track, ensuring the cutting edges are facing the right direction. 4. Snap the handle back into place to secure the new blade.
  7. How do you use Cricut tweezers? Cricut tweezers are used

    for precise lifting and handling of small, delicate materials, particularly when weeding intricate vinyl designs or removing debris from the cutting mat. They are used by squeezing the handles to open the tips, placing the tweezers around the object, and then releasing pressure to secure it. www.mannyexplore.com