ONOS Cluster Experiment

Setting up a basic (incomplete) ONOS Cluster + some tests / experimentations

Transcript

1. 1 / 50 ONOS Cluster Experiment Eueung Mulyana https://telematika.org/remark/onos3 Intro+Labs | Attribution-ShareAlike CC BY-SA
2. Outline Experiment Setup Target Machines Management VM stc* & Manual Tests 2 / 50
3. ONOS 1.12.0 2x LattePanda 4G/64G | 1x Raspberry Pi 3B VirtualBox 5.2.6 | Ubuntu 16.04.3 3 / 50
4. Experiment Setup 4 / 50
5. 5 / 50 Target Machine: a machine (physical, virtual, container, ...) where ONOS runs. Cluster: a set of target machines working together as a distributed system. Management Machine: an optional machine meant for operators, used to deploy and manage ONOS from a single position on one or more target machines. At least one target machine is needed to install and run ONOS. Cluster allows ONOS to spread the load, being able to better scale and improve performances. ONOS can be deployed and managed on a target machine either locally (from the machine itself), or from a remote machine, called management machine. The management machine is optional. Ref: [Abstractions and de nitions]
6. Environment Overview 6 / 50
7. 7 / 50 Notes We recommend - and actually require - at least three nodes if you need fault tolerance. Underlying ONOS in part is several Raft clusters which require a majority of the cluster to be available to make progress... @jordan | Discussion Thread
8. Management VM | VirtualBox Setting 8 / 50
9. Management VM | VirtualBox Setting 9 / 50
10. Management VM | Xubuntu 16.04.3 10 / 50
11. Target Machines + Mininet Box 11 / 50
12. Target Machines + Mininet Box 12 / 50
13. Target Machines 13 / 50
14. 14 / 50 Target Machine Install OS (Ubuntu Server 16.04.3) Install Dependencies & Set Envs ONOS Manual Installation (Optional)
15. Hardware Speci cs LattePanda SBC 15 / 50
16. 16 / 50 LattePanda 4G/64G Ubuntu Server 16.04.3 ESC Chipset > South Bridge > LPSS & SCC Con guration > SCC SDIO Support = PCI Mode F4 Boot and Install with the HWE kernel Install Ubuntu Server Notes: (1) No network interfaces were found -> Continue; (2) Guided - use entire disk
17. 17 / 50 Preparation Interface & Network Access # console $ sudo ifconfig $ sudo dhclient $ hostname -I # ----------------------------- # remote $ ssh em@192.168.0.14 em@onos181:~$ cat /etc/network/interfaces ... auto enx00e04c360a5d iface enx00e04c360a5d inet static address 192.168.0.181 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 8.8.4.4
18. ~$ ssh em@192.168.0.181 em@192.168.0.181's password: Welcome to Ubuntu 16.04.3 LTS (GNU/Linux 4.13.0-32-generic x86_64) ... Last login: Mon Feb 19 19:12:51 2018 from 192.168.0.210 ~$ sudo cp /etc/apt/sources.list /etc/apt/sources.list.ori ~$ sudo sed -i 's/http:\/\/us.archive.ubuntu.com\/ubuntu\//http:\/\/kambing.ui.ac.id\/ubuntu\/ ~$ sudo sed -i 's/http:\/\/id.archive.ubuntu.com\/ubuntu\//http:\/\/kambing.ui.ac.id\/ubuntu\/ ~$ sudo apt update ~$ sudo apt upgrade # ---------------------------------- # after upgrade ~$ ifconfig -a enx00e04c360a5d Link encap:Ethernet HWaddr 00:e0:4c:36:0a:5d inet addr:192.168.0.181 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe36:a5d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:215 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:221681 (221.6 KB) TX bytes:18351 (18.3 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11840 (11.8 KB) TX bytes:11840 (11.8 KB) wlan0 Link encap:Ethernet HWaddr 54:c9:df:86:fc:be BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) 18 / 50 Update/ Upgrade Check
19. Dependencies & Envs 19 / 50
20. 20 / 50 Preparation Deps Envs $ sudo apt-get install unzip zip tree $ sudo apt-get install software-properties-common -y && \ sudo add-apt-repository ppa:webupd8team/java -y && \ sudo apt-get update && \ echo "oracle-java8-installer shared/accepted-oracle-license-v1-1 select true" | sudo debconf-s sudo apt-get install oracle-java8-installer oracle-java8-set-default -y $ java -version java version "1.8.0_161" Java(TM) SE Runtime Environment (build 1.8.0_161-b12) Java HotSpot(TM) 64-Bit Server VM (build 25.161-b12, mixed mode) $ which java /usr/bin/java # ------------------------ $ echo $JAVA_HOME /usr/lib/jvm/java-8-oracle $ cat .profile ... PATH="/opt/onos/bin:$PATH" export LC_ALL="en_US.UTF-8" export LC_CTYPE="en_US.UTF-8"
21. ONOS Manual Installation 21 / 50
22. # Transfer onos-1.12.0.tar.gz $ sftp em@192.168.0.181 sftp> put onos-1.12.0.tar.gz Uploading onos-1.12.0.tar.gz to /home/em/onos-1.12.0.tar.gz onos-1.12.0.tar.gz 100% 215MB 5.1MB/s 00:42 sftp> quit # Extract $ sudo mv onos-1.12.0.tar.gz /opt/ $ cd /opt && sudo tar xzf onos-1.12.0.tar.gz $ sudo rm -f onos-1.12.0.tar.gz $ sudo mv onos-1.12.0 onos # ------------------------------------- # Test $ /opt/onos/bin/onos-service start Welcome to Open Network Operating System (ONOS)! ____ _ ______ ____ / __ \/ |/ / __ \/ __/ / /_/ / / /_/ /\ \ \____/_/|_/\____/___/ Documentation: wiki.onosproject.org Tutorials: tutorials.onosproject.org Mailing lists: lists.onosproject.org Come help out! Find out how at: contribute.onosproject.org Hit '<tab>' for a list of available commands and '[cmd] --help' for help on a specific command. Hit '<ctrl-d>' or type 'system:shutdown' or 'logout' to shutdown ONOS. onos> apps -s -a Service org.onosproject.app.ApplicationService not found onos> apps -s -a + 18 org.onosproject.drivers 1.12.0 Default Drivers 22 / 50 ONOS Binary Test
23. 23 / 50 ONOS Service # ONOS user $ sudo adduser sdn --system --group # No password $ sudo visudo %sudo ALL=(ALL) NOPASSWD:ALL # Service user /opt/onos$ nano options ONOS_USER=sdn # ------ # Ownership / write access $ sudo chown sdn:sdn /opt/onos -R # ------ # Service $ sudo cp /opt/onos/init/onos.initd /etc/init.d/onos $ sudo cp /opt/onos/init/onos.initd /etc/init.d/onos $ sudo cp /opt/onos/init/onos.service /etc/systemd/system/ $ sudo systemctl daemon-reload $ sudo systemctl enable onos $ sudo service onos status
24. em@onos182:~$ onos-user-password em 123 em@onos182:~$ onos-user-password onos rocks # note: logout from web ui em@onos182:~$ onos Password authentication Password: Welcome to Open Network Operating System (ONOS)! ____ _ ______ ____ / __ \/ |/ / __ \/ __/ / /_/ / / /_/ /\ \ \____/_/|_/\____/___/ Documentation: wiki.onosproject.org Tutorials: tutorials.onosproject.org Mailing lists: lists.onosproject.org Come help out! Find out how at: contribute.onosproject.org Hit '<tab>' for a list of available commands and '[cmd] --help' for help on a specific command. Hit '<ctrl-d>' or type 'system:shutdown' or 'logout' to shutdown ONOS. onos> ^D # ----------------------------- em@onos182:~$ ll /opt/onos/bin total 64 drwxrwxrwx 2 sdn sdn 4096 Dec 12 05:04 ./ drwxrwxrwx 8 sdn sdn 4096 Feb 25 08:57 ../ -rwxrwxrwx 1 sdn sdn 969 Dec 12 05:04 _check-json* -rwxrwxrwx 1 sdn sdn 1347 Dec 12 05:04 _find-node* -rwxrwxrwx 1 sdn sdn 273 Dec 12 05:04 onos* -rwxrwxrwx 1 sdn sdn 3368 Dec 12 05:04 onos-app* -rwxrwxrwx 1 sdn sdn 1287 Dec 12 05:04 onos-backup* -rwxrwxrwx 1 sdn sdn 1960 Dec 12 05:04 onos-cfg* -rwxrwxrwx 1 sdn sdn 1860 Dec 12 05:04 onos-compile-yang* -rwxrwxrwx 1 sdn sdn 1310 Dec 12 05:04 onos-form-cluster* -rwxrwxrwx 1 sdn sdn 197 Dec 12 05:04 onos-jpenable* -rwxrwxrwx 1 sdn sdn 1961 Dec 12 05:04 onos-netcfg* -rwxrwxrwx 1 sdn sdn 1073 Dec 12 05:04 onos-restore* -rwxrwxrwx 1 sdn sdn 2011 Dec 12 05:04 onos-service* 24 / 50 onos-user- password onos (Local CLI) onos-form- cluster
25. Management / Dev VM 25 / 50
26. 26 / 50 Typical Work ow 1. Make changes to the code 2. Build ONOS with onos-buck buld onos 3. Load the cell settings with cell $YOUR_CELL_NAME 4. Load your topology with topo $YOUR_TOPO_NAME 5. Deploy ONOS target machines with stc setup 6. Deploy the Mininet topology with stc net-setup Ref: [Cells and ONOS test scripts]
27. 27 / 50 Management VM Preparation (Deps, Envs, Network) Clone, Checkout & Build (+others: mvn preparation, archetypes) Cell & Topo SSH Key Setup (incl. Target Machines) onos CLI stc Commands Other Useful Commands
28. 28 / 50 Preparation Deps Envs Network # Some deps $ sudo apt install zip unzip (installed) $ sudo apt install curl tree git openssh-server # Install JDK $ sudo apt-get install software-properties-common -y && \ sudo add-apt-repository ppa:webupd8team/java -y && \ sudo apt-get update && \ echo "oracle-java8-installer shared/accepted-oracle-license-v1-1 select true" | sudo debconf-s sudo apt-get install oracle-java8-installer oracle-java8-set-default -y # ----------------------------- $ nano .profile export JAVA_HOME=/usr/lib/jvm/java-8-oracle/ $source .profile # Install Maven $sudo apt install maven # ----------------------------- # Host-only network $ cat /etc/network/interfaces ... auto enp0s8 iface enp0s8 inet static address 192.168.56.70 netmask 255.255.255.0 ... # VBox shared folder $ sudo adduser em vboxsf
29. $ git clone https://gerrit.onosproject.org/onos $ cd onos && git checkout 1.12.0 ~$ nano .profile export ONOS_ROOT=/home/em/onos source $ONOS_ROOT/tools/dev/bash_profile $ source .profile # Install/Build $ tools/build/onos-buck build onos --show-output # if failed e.g. NPM, w/h bash_profile # rm -rf bin/ && rm -rf buck-out/ ~/onos$ tools/build/onos-buck build onos --show-output Updating Buck... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 44.3M 100 44.3M 0 0 227k 0 0:03:19 0:03:19 --:--:-- 253k Archive: cache/buck-v2017.11.30.01.zip ... Successfully updated Buck in /home/em/onos/bin/buck to buck-v2017.11.30.01.zip Not using buckd because NO_BUCKD is set. ... The outputs are: //tools/package:onos-package buck-out/gen/tools/package/onos-package/onos.tar.gz ~/onos$ tree -L 1 -d . |----- apps |----- bin |----- bucklets |----- buck-out |----- buck-tools |----- cli |----- core |----- docs |----- drivers |----- features |----- incubator |----- lib 29 / 50 Checkout Build
30. 30 / 50 Check Dev Preparation Some Executables # DEV preparation ~$ cd onos && onos-buck-publish-local $ cd $ONOS_ROOT/tools/package/archetypes $ mvn clean install (mci) # ----- # Check ~$ which onos /home/em/onos/tools/test/bin/onos ~$ which onos-create-app /home/em/onos/tools/dev/bin/onos-create-app ~$ which onos-app /home/em/onos/tools/package/runtime/bin/onos-app
31. ~/onos/tools/test/cells$ cp local local-sbc && nano local-sbc # Local SBC-based ONOS instances 1,2 & ONOS mininet box export ONOS_NIC=192.168.0.* export OC1="192.168.0.181" export OC2="192.168.0.182" export OCN="192.168.0.155" export ONOS_APPS="drivers,openflow,fwd,proxyarp,mobility" ONOS_USER=em $ cell local-sbc ONOS_CELL=local-sbc OCI=192.168.0.181 OC1=192.168.0.181 OC2=192.168.0.182 OCN=192.168.0.155 ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility ONOS_GROUP=sdn ONOS_MN_PY=/home/em/onos/tools/dev/mininet/onos.py ONOS_NIC=192.168.0.* ONOS_SCENARIOS=/home/em/onos/tools/test/scenarios ONOS_TOPO=default ONOS_USER=em ONOS_WEB_PASS=rocks ONOS_WEB_USER=onos # -------------------- # ONOS Client/CLI via SSH $ ssh -p 8101 onos@localhost # rocks $ ssh -p 8101 onos@$OCI # rocks # -------------------- ~$ cells beast # Bare metal cluster (7-node) beast-1 # Bare metal cluster (7-node) beast-3 # Bare metal cluster (7-node) 31 / 50 cell onos (via ssh)
32. em@onos-ide:~$ ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/home/em/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/em/.ssh/id_rsa. Your public key has been saved in /home/em/.ssh/id_rsa.pub. The key fingerprint is: SHA256:x61ayOgkKfOu4Kb1kg6qhzQg1zWtinDbeDRi7XOf8dk em@onos-ide The key's randomart image is: +---[RSA 2048]----+ | . | | o . | | o . o | |+ = = . . . | |o= O o S o . | | o+ *..o.o . | |+.=oooo.o+oo | |+=+= + ooo E | |B+o++ . . | +----[SHA256]-----+ # ---------------- # via ssh-copy-id em@onos-ide:~$ ssh-copy-id em@192.168.0.181 /usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/home/em/.ssh/id_rsa.pub" /usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that a /usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is t em@192.168.0.181's password: Number of key(s) added: 1 Now try logging into the machine, with: "ssh 'em@192.168.0.181'" and check to make sure that only the key(s) you wanted were added. # via onos-push-keys em@onos-ide:~$ onos-push-keys 192.168.0.182 em@192.168.0.182's password: em@onos-ide:~$ ONOS_USER=ubuntu onos-push-keys $OCN ubuntu@192.168.0.155's password: 32 / 50 ssh-keygen onos-push-keys Test
33. em@onos-ide:~$ onos-secure-ssh # Host [localhost]:8101 found: line 1 /home/em/.ssh/known_hosts updated. Original contents retained as /home/em/.ssh/known_hosts.old usage: onos-user-password user {password|--remove} ID | State | Web-State | Level | Web-ContextPath | Name ------------------------------------------------------------------------------ 157 | Active | Deployed | 80 | /onos/v1 | onos-rest (1.12.0) 159 | Active | Deployed | 80 | /onos/ui | onos-gui (1.12.0) # Host [localhost]:8101 found: line 1 /home/em/.ssh/known_hosts updated. Original contents retained as /home/em/.ssh/known_hosts.old # Host [localhost]:8101 found: line 1 /home/em/.ssh/known_hosts updated. Original contents retained as /home/em/.ssh/known_hosts.old usage: onos-user-password user {password|--remove} ID | State | Web-State | Level | Web-ContextPath | Name ------------------------------------------------------------------------------ 157 | Active | Deployed | 80 | /onos/v1 | onos-rest (1.12.0) 159 | Active | Deployed | 80 | /onos/ui | onos-gui (1.12.0) # Host [localhost]:8101 found: line 1 /home/em/.ssh/known_hosts updated. Original contents retained as /home/em/.ssh/known_hosts.old # ----------------------- em@onos-ide:~$ onos Welcome to Open Network Operating System (ONOS)! ____ _ ______ ____ / __ \/ |/ / __ \/ __/ / /_/ / / /_/ /\ \ \____/_/|_/\____/___/ Documentation: wiki.onosproject.org Tutorials: tutorials.onosproject.org Mailing lists: lists.onosproject.org Come help out! Find out how at: contribute.onosproject.org Hit ' t b ' f li t f il bl d 33 / 50 onos-secure-ssh onos (CLI)
34. em@onos-ide:~$ topos em@onos-ide:~$ topo dual em@onos-ide:~$ ONOS_USER=ubuntu stc net-setup 2018-02-25 13:32:41 Net-Setup started 2018-02-25 13:32:41 Push-Topos started -- onos-push-topos 192.168.0.155 2018-02-25 13:32:41 Stop-Mininet-If-Needed started -- onos-mininet stop 2018-02-25 13:32:43 Push-Topos completed 2018-02-25 13:32:44 Stop-Mininet-If-Needed completed 2018-02-25 13:32:44 Clean-Mininet-If-Needed started -- onos-mininet cleanup 2018-02-25 13:32:48 Clean-Mininet-If-Needed completed 2018-02-25 13:32:48 Wipe-Out-Data-Before started -- onos-wipe-out 2018-02-25 13:32:54 Wipe-Out-Data-Before completed 2018-02-25 13:32:54 Initial-Summary-Check started -- onos-check-summary 192.168.0.181 [0-9]* 2018-02-25 13:32:55 Initial-Summary-Check completed 2018-02-25 13:32:55 Config-Topo started -- onos-netcfg 192.168.0.181 /home/em/onos/tools/test 2018-02-25 13:32:56 Config-Topo completed 2018-02-25 13:32:56 Start-Mininet started -- onos-mininet start topos/topo dual.py 192.168.0. 2018-02-25 13:37:30 Start-Mininet completed 2018-02-25 13:37:30 Wait-For-Mininet started -- onos-mininet wait 10 2018-02-25 13:37:42 Wait-For-Mininet completed 2018-02-25 13:37:42 ARP-Hosts started -- onos-mininet sendAndExpect gratuitousArp --expect . 2018-02-25 13:37:45 ARP-Hosts completed 2018-02-25 13:37:45 Check-Summary started -- onos-check-summary 192.168.0.181 [0-9]* 2 1 1 2018-02-25 13:38:05 Check-Summary failed 2018-02-25 13:38:05 Balance-Masters started -- onos 192.168.0.181 balance-masters 2018-02-25 13:38:05 Balance-Masters completed 2018-02-25 13:38:05 Check-Flows started -- onos-check-flows 192.168.0.181 2018-02-25 13:38:11 Check-Flows completed 2018-02-25 13:38:11 Net-Setup failed 5:29 Failed! 11 steps succeeded; 2 steps failed; 0 steps skipped # openflow only # ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility 34 / 50 topo stc net-setup
35. em@onos-ide:~$ ONOS_USER=ubuntu onos-mininet attach [detached from 23035.mininet] Connection to 192.168.0.155 closed. # ---------------- # mininet 0.155 $ sudo visudo (no passwd) $ sudo apt install screen $ screen -S mininet # screen -list | screen -r | ctrl+a d | screen -X -S 4122 kill # ---------------- em@onos-ide:~$ ONOS_USER=ubuntu onos-mininet attach ^a+d 35 / 50 onos-mininet attach
36. em@onos-ide:~$ ONOS_USER=ubuntu onos-mininet stop em@onos-ide:~$ ONOS_USER=ubuntu onos-mininet cleanup em@onos-ide:~$ onos-wipe-out please em@onos-ide:~$ onos-netcfg -v $OC1 DELETE em@onos-ide:~$ onos-netcfg -v $OC2 DELETE Usage: onos-netcfg [-v] node file|DELETE [url] # ---------------- # oneliner $ ONOS_USER=ubuntu onos-mininet stop && ONOS_USER=ubuntu onos-mininet cleanup $ onos-wipe-out please && onos-netcfg -v $OC1 DELETE && onos-netcfg -v $OC2 DELETE 36 / 50 onos-mininet stop onos-mininet cleanup onos-wipe-out onos-netcfg
37. stc* & Manual Tests 37 / 50
38. 38 / 50 Test #1 topo & stc net-setup 1. Load the cell settings with cell $YOUR_CELL_NAME 2. Load / activate apps (onos CLI) 3. Load your topology with topo $YOUR_TOPO_NAME 4. Deploy the Mininet topology with stc net-setup
39. em@onos-ide:~$ cell local-sbc ONOS_CELL=local-sbc OCI=192.168.0.181 OC1=192.168.0.181 OC2=192.168.0.182 OCN=192.168.0.155 ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility ONOS_GROUP=sdn ONOS_MN_PY=/home/em/onos/tools/dev/mininet/onos.py ONOS_NIC=192.168.0.* ONOS_SCENARIOS=/home/em/onos/tools/test/scenarios ONOS_TOPO=default ONOS_USER=em ONOS_WEB_PASS=rocks ONOS_WEB_USER=onos em@onos-ide:~$ topos default * # Default US MPLS topology recipe dual # Simple Dual topology recipe geant # GEANT & Nordnet topology recipe sdnip # SDN-IP topology recipe uk # Simple UK topology recipe vpls # Default VPLS topology recipe em@onos-ide:~$ topo ONOS_TOPO=default OTH=25 OTL=140 OTD=25 em@onos-ide:~$ onos Welcome to Open Network Operating System (ONOS)! ____ _ ______ ____ / __ \/ |/ / __ \/ __/ / /_/ / / /_/ /\ \ \____/_/|_/\____/___/ Documentation: wiki.onosproject.org Tutorials: tutorials.onosproject.org Mailing lists: lists.onosproject.org Come help out! Find out how at: contribute.onosproject.org 39 / 50 cell local-sbc topo default onos
40. em@onos-ide:~$ ONOS_USER=ubuntu stc net-setup 2018-02-27 18:35:37 Net-Setup started 2018-02-27 18:35:37 Push-Topos started -- onos-push-topos 192.168.0.155 2018-02-27 18:35:37 Stop-Mininet-If-Needed started -- onos-mininet stop 2018-02-27 18:35:40 Push-Topos completed 2018-02-27 18:35:42 Stop-Mininet-If-Needed completed 2018-02-27 18:35:42 Clean-Mininet-If-Needed started -- onos-mininet cleanup 2018-02-27 18:35:46 Clean-Mininet-If-Needed completed 2018-02-27 18:35:46 Wipe-Out-Data-Before started -- onos-wipe-out 2018-02-27 18:35:51 Wipe-Out-Data-Before completed 2018-02-27 18:35:51 Initial-Summary-Check started -- onos-check-summary 192.168.0.181 [0-9]* 2018-02-27 18:35:51 Initial-Summary-Check completed 2018-02-27 18:35:51 Config-Topo started -- onos-netcfg 192.168.0.181 /home/em/onos/tools/test 2018-02-27 18:35:53 Config-Topo completed 2018-02-27 18:35:53 Start-Mininet started -- onos-mininet start topos/topo default.py 192.168 2018-02-27 18:35:55 Start-Mininet completed 2018-02-27 18:35:55 Wait-For-Mininet started -- onos-mininet wait 10 2018-02-27 18:36:23 Wait-For-Mininet completed 2018-02-27 18:36:23 ARP-Hosts started -- onos-mininet sendAndExpect gratuitousArp --expect . 2018-02-27 18:36:27 ARP-Hosts completed 2018-02-27 18:36:27 Check-Summary started -- onos-check-summary 192.168.0.181 [0-9]* 25 140 2 2018-02-27 18:36:28 Check-Summary completed 2018-02-27 18:36:28 Balance-Masters started -- onos 192.168.0.181 balance-masters 2018-02-27 18:36:29 Balance-Masters completed 2018-02-27 18:36:29 Check-Flows started -- onos-check-flows 192.168.0.181 2018-02-27 18:36:35 Check-Flows completed 2018-02-27 18:36:35 Net-Setup completed 0:57 Passed! 13 steps succeeded em@onos-ide:~$ ONOS_USER=ubuntu onos-mininet attach [detached from 2336.mininet] Connection to 192.168.0.155 closed. 40 / 50 stc net-setup
41. stc net-setup | Topo default 41 / 50
42. onos-mininet attach 42 / 50
43. 43 / 50 Test #2 Manual 1. Load the cell settings with cell $YOUR_CELL_NAME 2. Load / activate apps (onos CLI) 3. Run Mininet 4. Connect switches to the ONOS instances
44. ubuntu@pi:~$ sudo mn --topo linear,5 --mac --controller=remote,ip=192.168.0.181,port=6633 --sw +++ Creating network +++ Adding controller +++ Adding hosts: h1 h2 h3 h4 h5 +++ Adding switches: s1 s2 s3 s4 s5 +++ Adding links: (h1, s1) (h2, s2) (h3, s3) (h4, s4) (h5, s5) (s2, s1) (s3, s2) (s4, s3) (s5, +++ Configuring hosts h1 h2 h3 h4 h5 +++ Starting controller c0 +++ Starting 5 switches s1 s2 s3 s4 s5 ... # ---------------------------- mininet> sh sudo ovs-vsctl show 6535ca1b-67ad-4164-ac9b-8b1b11170705 Bridge "s2" Controller "ptcp:6655" Controller "tcp:192.168.0.181:6633" is_connected: true fail_mode: secure Port "s2-eth2" Interface "s2-eth2" Port "s2-eth1" Interface "s2-eth1" Port "s2-eth3" Interface "s2-eth3" Port "s2" Interface "s2" type: internal Bridge "s1" ... Bridge "s4" ... Bridge "s5" ... Bridge "s3" ... ovs_version: "2.5.2" # ---------------------------- mininet> sh sudo ovs-vsctl set-controller s1 tcp:192.168.0.181:6633 tcp:192.168.0.182:6633 mininet> sh sudo ovs-vsctl set-controller s2 tcp:192.168.0.181:6633 tcp:192.168.0.182:6633 44 / 50 cell sudo mn set-controller
45. onos> nodes id=192.168.0.181, address=192.168.0.181:9876, state=READY, version=1.12.0, updated=2m21s ago * id=192.168.0.182, address=192.168.0.182:9876, state=READY, version=1.12.0, updated=2m13s ago onos> masters 192.168.0.181: 5 devices of:0000000000000001 of:0000000000000002 of:0000000000000003 of:0000000000000004 of:0000000000000005 192.168.0.182: 0 devices onos> roles of:0000000000000001: master=192.168.0.181, standbys=[ ] of:0000000000000002: master=192.168.0.181, standbys=[ ] of:0000000000000003: master=192.168.0.181, standbys=[ ] of:0000000000000004: master=192.168.0.181, standbys=[ ] of:0000000000000005: master=192.168.0.181, standbys=[ ] # ------------------------------ onos> balance-masters # ------------------------------ onos> masters 192.168.0.181: 3 devices of:0000000000000001 of:0000000000000002 of:0000000000000005 192.168.0.182: 2 devices of:0000000000000003 of:0000000000000004 onos> roles of:0000000000000001: master=192.168.0.181, standbys=[ 192.168.0.182 ] of:0000000000000002: master=192.168.0.181, standbys=[ 192.168.0.182 ] of:0000000000000003: master=192.168.0.182, standbys=[ 192.168.0.181 ] of:0000000000000004: master=192.168.0.182, standbys=[ 192.168.0.181 ] of:0000000000000005: master=192.168.0.181, standbys=[ 192.168.0.182 ] 45 / 50 balance-masters
46. Initial State 46 / 50
47. balance-masters 47 / 50
48. Refs/Resources 48 / 50
49. Refs/Resources 1. ONOS - Wiki 2. Cells and ONOS test scripts 3. Appendix A : List of ONOS Utility Scripts (onos-* scripts) 4. bocon13/onos-byon: Build Your Own Network 5. Abstractions and de nitions 6. ONOS Distributed Tutorial - Slides 7. Running ONOS as a service 8. Installing on a single machine 9. Distributed ONOS Tutorial 10. Experimenting with ONOS clustering 49 / 50
50. 50 / 50 END Eueung Mulyana https://telematika.org/remark/onos3 Intro+Labs | Attribution-ShareAlike CC BY-SA