SocketMobile Bluetooth Barcode Scanner

Step by step on how to set up your socketmobile Bluetooth barcode scanner.

Transcript

1. How To Setup Your SocketMobile Bluetooth Barcode Scanner To Work With SASSI IMS.
2. What you need to get started  SocketMobile Bluetooth Barcode Scanner  CHS 7Xi and 7XiRx  iPad 2 or higher running iOS 5.0 or higher  SASSI IMS Software install on iPad
3. First Step: -Take the SocketMobile Bluetooth Barcode Scanner and Scan the iOS QR Code Below to set the scanner to the correct setting. Code can also be found in your SocketMobile manual.
4. Second Step: -Go to the Settings in the iPad and Choose Bluetooth.
5. Third Step: -Once in the Bluetooth setting page turn on the Bluetooth and select the SocketMobile Barcode Scanner (iOS Socket 7Xi [10F4C4]) Once it Appears.
6. Four and Final Step: -After Clicking the Correct Device a Message Will Appear Saying the Connection is Unsuccessful. Click OK and it Will Connect Anyway.
7. If you have any issues during the set up of the scanner reset the scanner by scanning this QR code and repeat the process. Don’t forget to re-scan the iOS QR code after the reset.